Seed Preparatory Section


NON IBR Boiler

We are apex in the list of companies imparting the wide assortment of Wood/Oil/ Husk/ LDO fired Non-IBR Steam Boiler for the clients. These Vertical Non-IBR Steam Boilers are manufactured with the premium quality of raw material procured from the authentic vendor base. Our Non IBR Steam Boilers widely earn accolades for their durability and superior quality and this help us to serve both the small and medium scale plants. Our priorities are client satisfaction, so we offer the products that suit best to the firm. We do hold the capability of customizing the entire range as per the specification laid down by the client. Medium and high capacity Non-IBR Boilers come with Super-Heater for producing dry steam.

Fired by: Wood/ Coal/ Diesel/ Furnace Oil/ Husk/ Bagasse or other fuels

Capacity range: 100kg/ hr to 900 kg/hr

Pressure: Upto 17.54 kg/ cm²

I.B.R Boiler > A. Large Industrial Boilers > I. AFBC Boiler

CAPACITY : UPTO 175 TPH

PRESSURE : UPTO 105 KG/CM2

STEAM TEMP : UPTO 525°C

FUEL RICE HUSK, COAL, LIGNITE, WASHERY, REJECTS, CHAR ETC.

Salient Features
  • Bi-drum / Single Drum, Water Tube, Natural circulation top / bottom supported design.
  • Better Evaporator Design for better reliability.
  • Suitable for saturated and superheater steam. Suitable for Cogeneration and Captive Power Plants.
  • Multifuel firing options.
  • Underbed / Overbed fuel feed system.
  • Bottom Hopper Design for specific applications.
  • Optimum combustion with staged Secondary Air System.

II. Grate Fired Boilers > a) Traveling Grate (TG)

CAPACITY : Upto 170 TPH

PRESSURE : Upto 110 Kg/cm2 (g)

STEAM TEMP : Upto 520°C

FUEL : Baggase, Rice Husk, Cotton Stalk, Mustard Stalk, Wood Chips, Paddy Straw, Coal, Lignite etc.

Salient Features
  • Continuous Ash Discharge.
  • Bi-Drum/Single Drum Design, Natural Circulation, Top Supported Design.
  • Tall Furnace for Stagged/Complete Combustion.
  • Optimum combustion with staged secondary air system.
  • 2 Stage/3Stage Superheater with interstage Spray Attemperator.
  • Even Fuel Distribution on the Entire Grate.
  • Modulating Cyclo motor for Spreader Dampers.
  • Grate Driven by Hydraulic Drive/ Mechanical Drive.

II. Grate Fired Boilers > b) Dumping Grate (DG)

CAPACITY : Upto 175 TPH

PRESSURE : Upto 110 KG/CM2

STEAM TEMP : Upto 540°C

FUEL : Baggase, Rice Husk etc

Salient Features
  • Generously sized grate.
  • Soot Blowers for on load cleaning of heating surface.
  • Secondary air distribution system.
  • Pneumatically operated sectionalized dumping grate.
  • Two stage superheaters with single stage attemperator for accurate steam temperature control

II. Grate Fired Boilers > c) Pulsating Grate (PG))

CAPACITY : Upto 50 TPH

PRESSURE : Upto 67 KG/CM2

FUEL : Rice husk, Bagasse, Mustard Husk, Cotton Stalk, Biomass Fuels and Brequets etc.

STEAM TEMP : Upto 490°C

Salient Features
  • Generously sized grate.
  • Soot Blowers for on load cleaning of heating surface.
  • Secondary air distribution system.
  • Hydraulically operated sectionalized pulsating grate.
  • Two stage superheaters with single stage attemperator for accurate steam temperature control.
  • Continuous Ash discharge.

I.B.R Boiler > B. Process Boilers > a) Hypac Boiler

CAPACITY : Upto 15 TPH

PRESSURE : Upto 25 KG/CM2

FUEL : Rice Husk, Coal, Petcoke, Lignite Etc.

Salient Features
  • Water cum smoke tube boilers
  • Easily takes the variation of load fluctuations
  • Burn agriculture residue and other high volume low density fuels
  • Can be equipped with fluidized bed, moving and stationery grate furnace
  • Four side water wall design available

b) Inpac Boiler

Inpac is a packaged, three-pass smoke tube, with fully wet back boiler. Inpac comes in two series for Wood & Biomass and other for Coal. It can also be customized to a completely skid mounted unit on customer demand.

PRODUCT FEATURES
  • Three-pass smoke tube with fully wet back boiler.
  • Multi-fuel option Wood/Briqutte/Baggase/Coal.
  • High efficiency of about 70% to 74%.
  • High dryness fraction steam increases usable heat.
  • Large water holding capacity.
  • Plain Single furnaces for boiler upto 4 TPH capacity.

c) Energypac Boiler

CAPACITY : Upto 15 TPH

PRESSURE : Upto 25 KG/CM2

FUEL : Wood, Plywood Waste, Bagasse, Coal, Mustard Husk and Biomass Fuels

Salient Features
  • Similar to Hypac boiler except having equipped with large grate to burn high moisture fuel like wood chips and other agro wastes
High Efficiency
  • Paneled water wall furnace and three pass design absorbs maximum heat
Dry Steam
  • Large water-steam interface area ensures dry steam
Multi-fuel option
  • Wood, briquettes, coal, agro waste, etc

d) Oil Pac Boiler

CAPACITY : 1 TPH - 20 TPH

PRESSURE : 10.54 KG/CM2 TO 17.5 KG/CM2

FUEL : Oil, Gas

Salient Features
  • Standard design integral furnace boiler suitable for burning heavy and light fuel, oils including gas
  • Multipass fire tube design
  • Three pass, fully automatic, wetback design
  • Designed to give overall efficiency of 88% on NCV
  • Dryness fractions to the order of 0.985 achievable

e) Effypac Boiler

CAPACITY : 500,1000,1500,2000 Kg/hr

PRESSURE : Upto 17.5 Kg/cm²

STEAM TEMP : Saturated Steam

FUEL : Coal, Wood, Agro Waste, Briquettes etc.

Salient Features
  • Plug & Steam Unit need only water, power & Chimney.
  • Skid mounted design not requiring any structure, Water tank, insulation, ducting, refractory etc.
  • Compact design suitable for industries with less space.
  • Inbuilt HRU for high efficiency.
  • Cyclone included in package for controlling outlet dust concentration.

Note: Product color/ finishing might be different, buyer should clarify & confirm before ordering.